Roller Idler Rebuilding Machine

• High durability
• Low maintenance
• Optimum performance
• Power efficient

Simpletec Roller and Idler Rebuilding machine WS-900 is an extra wide machine, which can accommodate idlers up to 900mm diameter. The idler/roller can be tilted by 45o clockwise and counterclockwise. As the opening is quite wide, even two parts can be welded at at time. The machine is provided with a heavy duty welding head, powered by a 1000 Amps, heavy duty output power source. The welding head has a hopper to supply the flux and wire feeder unit which can feed 2.8mm to 4mm diameter wires. Machine is supplied with power source, wire feeder and flux recovery unit. Machine can be supplied with two welding heads and two power sources.

Features:

• Rugged construction
• Compact design
• Efficient performance
• Low power consumption

 Technical Specification -

• Model : WS 900-1200A / WS 900-1000A
• Max. Roller Diameter : 1250 mm
• Admit (Width between centers) : 650 mm
• Max. Roller Weight : 600 kg
• Wire Feed Unit Ratio : 156 : 1
• Wire Feed Speed : 0.2 to 4 m/min
• Wire Diameter : 2.4 mm - 5.0 mm
• Torch Tilt : + 45o
• Hopper Capacity : 10 kg

• Input Power : 82 kVA
• Power Source Type : Thyristorised
• Welding Current Range : 1200 Amps/44 V
• Welding Current at 60% Duty Cycle : 1200 Amps
• Welding Current at 100% Duty Cycle : 950 Amps
• Power Supply : 415 V +/- 5%, 50 Hz, 3 Phase

• Air Flow Required : 175 lpm
• Air Pressure Required : 0.4 MPa
• Sound Level : 70 dB